Skip to content
SatPicker

Starlink Price Increase (Nov 2026): Dynamic Pricing by Address

Starlink Residential now prices each address by local demand: reported hikes of 10–20% (Max up to $156) and discounts of up to 50% in some cities, on bills from November 30, 2026. How to check yours.

Updated November 19, 2026 · By the SatPicker team

Split view: a cabin with a dish on its roof, and a camper van with a dish on a mountain road
Split view: a cabin with a dish on its roof, and a camper van with a dish on a mountain road

In short

Starlink now prices Residential plans address by address, based on local network capacity and demand. The first changes apply to billing cycles from November 30, 2026. Customers in busy areas report increases of 10% to 20%, which puts Residential Max as high as $156 a month, while new customers in some cities with spare capacity are offered up to half off. Roam is not part of the change. Your real price is the one starlink.com shows for your address. Checked November 19, 2026.

Starlink has always priced Residential service by location: crowded cells paid a surcharge, some rural areas got the cheaper 100 Mbps tier. Since November 2026 that is the rule for the monthly price too. Instead of one national price per tier, each address gets a price that follows how much capacity the network has there and how many people want it, reviewed roughly every quarter.

What has happened so far (November 2026)

  • Late October: Starlink emails US Residential customers that prices will follow local demand, with the first changes on billing cycles from November 30, 2026.
  • Early November: the new prices appear first in parts of Kansas, Missouri and nearby states, then customers from Virginia to Alaska report increases of 10% to 20%. Residential Max reaches $156 a month in the busiest areas.
  • The other direction: in cities where the network has room, such as Boston, San Francisco and New York, new customers are offered discounts reported at 30% to 50%.

Sources: customer reports and press coverage (TechSpot, November 8, 2026; PCMag). Starlink has not published a national price table, so treat these as reported figures.

What the ranges look like

These are the usual US prices and the ranges reported since the change. They are not quotes: only the checkout for your address is.

PlanUsual priceReported range
Residential 100 Mbps$55/mo$44–$66/mo
Residential 200 Mbps$85/mo$68–$102/mo
Residential Max$130/mo$104–$156/mo

Monthly price vs the one-time demand surcharge

These are two different things. The monthly price is the new address-based figure above. The demand surcharge is a one-time charge that Starlink's help center says may apply in high-demand areas when you buy service, activate a new plan, or move your service address into a high-demand area. It is charged per service line, and Standby Mode does not waive it. If you move from one high-demand area to another, a surcharge you already paid is credited toward the new one.

Who is likely to pay more, and who less

The logic is capacity. Suburbs where many neighbors already have a dish, and areas with long waitlists, are the ones most likely to see the top of the range. Remote addresses and dense cities where the network has room to spare are the ones most likely to see the bottom. Prices are reviewed over time, so a price can move in either direction at the next review. New satellites add capacity: see what the V3 satellites change.

How to check your price in two minutes

  1. Open starlink.com and choose Residential.
  2. Enter your exact service address (the price is calculated for that address, not your ZIP code).
  3. Note the monthly price and any one-time surcharge shown before checkout.
  4. Put that price into our cost calculator to see your real 12-month cost, kit included.

If your price goes up

  • Check if you really need Residential. If the dish moves with you or sits idle part of the year, compare with Roam, which is not part of this change.
  • Pause instead of paying full price. For months you are away, Standby Mode costs a fraction of a plan.
  • Drop a tier. If you mostly stream on one or two screens, the 200 Mbps tier is often enough instead of Max.

Everything on this page comes from Starlink's notice to customers as reported by subscribers and the press, from the Starlink help center, and from starlink.com as we read it on November 19, 2026. SatPicker is not affiliated with SpaceX or Starlink. Compare all tiers on our Starlink plans page.

Frequently asked questions

Why did my Starlink bill go up?

Starlink told US Residential customers by email that prices now follow local capacity and demand. Subscribers in states including Virginia, North Carolina, Louisiana, Washington and Alaska reported increases of 10% to 20%, with Residential Max reaching $156 a month (TechSpot, November 8, 2026). The new price applies from your first billing cycle on or after November 30, 2026.

How much can my Starlink bill change?

Reported changes sit roughly 20% either side of the usual tier price: about $44–$66 for Residential 100 Mbps, $68–$102 for Residential 200 Mbps, $104–$156 for Residential Max. Some cities with spare capacity go further down for new customers, with offers of up to 50% off reported.

Does dynamic pricing apply to Roam or the Starlink Mini?

The change covers Residential plans. Roam prices on starlink.com were unchanged when we checked on November 19, 2026 (from $55 a month), and the Mini is sold mainly with Roam in the US.

What is the Starlink demand surcharge?

It is a separate, one-time charge. Starlink's help center says it may apply in high-demand areas when you buy service, activate a new plan, or move your service address into a high-demand area. Standby Mode does not remove it.

Is there a contract or cancellation fee?

No. Starlink Residential stays month to month with no contract and no early termination fee, so you can switch to Standby or cancel if your new price no longer makes sense.

How do I see the price for my address?

Go to starlink.com, choose Residential and enter your exact service address. The US Residential page only shows prices after an address is entered.

Free tool

True cost calculator

Type the price Starlink shows for your address and see your real 12-month cost.

Open the tool →

SatPicker is independent and not affiliated with SpaceX or Starlink. Specs come from Starlink's official specification sheets; prices are dated and can change — your Starlink checkout is the final word.